When it comes to solar lights, there are many different ways that you can mount them. Some people choose to use nails or screws, while others use adhesive pads or velcro.
In this blog post, we will discuss the 4 best ways to mount solar lights.
So without further ado, let’s jump right into it.
1. Nails And Screws
If you choose to use nails or screws, make sure that the surface is sturdy and can support the weight of the light.
You also want to be careful not to damage the solar panel on the light.
Some people like to use a small drill bit to pre-drill a hole in the surface before inserting the nail or screw.
This will help to prevent the surface from cracking or breaking.
Start by measuring out where you want the light to go and mark it with a pencil.
Then, pre-drill the hole if necessary, insert the nail or screw into place, and tighten until it is secure.
2. Adhesive Tape
If you choose to use adhesive tape, make sure that the surface is clean and free of any dirt or dust.
Also, be sure that the temperature is above 50 degrees Fahrenheit before applying the adhesive tape.
The most common type of adhesive tape for solar lights is called Velcro.
This adhesive tape is strong enough to hold the weight of the light and will not leave a mark on your surface if removed.
If you choose to use velcro, start by measuring out where you want the light to go and mark it with a pencil.
Then, remove the backing from the adhesive tape and attach it to the surface.
Press down firmly until it is secure.
Do not apply too much pressure, or you might damage the solar panel on the light.
Adhesive tape can also be used to attach lights to trees or other objects that have a rough surface.
3. Hooks And Hangers
If you choose to use hooks or hangers, make sure that the surface is sturdy and can support the weight of the light.
You also want to be careful not to damage the solar panel on the light.
Some people like to use a small drill bit to pre-drill a hole in the surface before inserting the hook or hanger.
Start by measuring out where you want the light to go and mark it with a pencil.
Then, pre-drill the hole if necessary, insert the hook or hanger into place, and tighten until it is secure.
If you are using a hanger, make sure that the opening is facing downwards so that the water can run off.
Solar lights can also be attached to gutters or roofing with special hooks and hangers made for that purpose.
Just be sure that it is secure so that the light doesn’t fall off and break in windy conditions.
4. Magnetism
Some solar lights come with a magnet on the back which can be used to attach the light to metal surfaces.
This is a great option if you want to mount the light on your car, motorcycle, or boat.
Just make sure that the surface is clean and free of any dirt or dust or else the magnet might not work.
Can You Clean Solar Lights?
Yes, you can clean solar lights by using a damp cloth and mild soap.
Be sure to avoid getting water inside the light or else it might not work properly.
Also, be careful not to scratch the panel on the light.
If the panel is scratched, it will not collect as much light and the light might not be as bright.
Last Words
These are just some of the ways to mount solar lights.
We hope this blog post has helped you to better understand how to mount solar lights and if you have any questions, please feel free to leave them in the comments section below.
Thanks for reading!